Hope create fluid connect and specify IP

Follow

Jameson

September 28, 2025 15:34

I can control another mac by two ways:

1. vnc + IP (more detail, I built Wide Area Networking by a app (wich work like tailscale))
2. jumpdesktop + fluid

 

First method (vnc + IP), disadvantage is: 
spend too many bandwith, and reach ISP 's upload limit (about 4MB/s).

 

Second method (jumpdesktop + fluid), disadvantace is:
1. connect to remote mac slow
(I guess relay server is not in my country.)
2. spend some bandwith, and reach relay server's upload limit (about 400KB/s)

So, I hope jumpdesktop could povide option:
connect to a remote mac by fluid and specify IP,

Then I could：
1. use fluid protocol high efficiency,
2. not reach relay server's upload limit （also reduce pressure of the relay server）
3. and avoid hight ping value betwen relay server and me

Please, wish your reply ~!

1

• 

  Abdul Ghani Madid September 29, 2025 21:10

  Hi,

  Thanks for sharing the details of your setup.
  To use Fluid, you don’t need to connect by entering the IP address of the viewer Mac.
  To set it up, simply install Jump Desktop Connect on the target Mac (the one you want to control) and sign in with your Jump Desktop account.
  Once it’s installed and running, Jump Desktop Connect automatically takes care of the connection and routing for you—no manual IP configuration is required.

  This way, Fluid will handle the most efficient path available, giving you the best performance.
  
  Thank you

  0

  Comment actions Permalink
• 

  Jameson September 30, 2025 15:41

  Use fluid, upload speed is  400KB/S ( I guess limit by relay server )  and  ping value very high.

  While specify IP,  upload speed is 4MB/S and ping value very low.

   

  So this is the reason I want specify IP

  0

  Comment actions Permalink

Please sign in to leave a comment.